Dr Salih Güngör is a senior lecturer in Materials Engineering in the School of Engineering and Innovation. After receiving his BSc and MSc in Metallurgical and Materials Engineering at METU, he obtained his PhD at The Open University with his work on small fatigue cracks. After working on several post-doctoral projects at the Universities of Sheffield and Oxford, he joined The Open University in 2002 as a lecturer.
Salih has over 25 years of research experience in applying optically-based experimental methods for characterizing in-situ behaviour of materials and structures. His recent interests include the application of Digital Image Correlation for strain measurement in high temperature tests, in particular for the characterisation of creep behaviour of weldments. He is currently the chairman of the British Society for Strain Measurement (http://www.bssm.org/).
Research projects that he has been involved in include:
Salih’s teaching activities are varied and include structural integrity, fracture mechanics, structural mechanics and dynamics, materials behaviour, forensic engineering and personal development. He is a member of the following module teams at The Open University:
|Materials Engineering Group||Group||Faculty of Mathematics, Computing and Technology|
The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation (2020-02)
Simm, T. H.; Das, Y. B.; Forsey, A. N.; Gungor, S.; Fitzpatrick, M. E.; Prakash, D. G. L.; Moat, R. J.; Birosca, S.; da Fonseca, J. Quinta and Perkins, K. M.
Materials Characterization, 160, Article 110114
Examining Stress Relaxation in a Dissimilar Metal Weld Subjected to Postweld Heat Treatment (2018-11)
Abburi Venkata, K.; Khayatzadeh, S.; Achouri, A.; de Oliveira, J. Araujo; Forsey, A. N.; Gungor, S.; Bouchard, P. J. and Truman, C. E.
Materials Performance and Characterization, 7(4) (pp. 675-692)
Mechanical Property Heterogeneity in Additively Manufactured Nickel Superalloy (2018-01-17)
Forsey, Alex; Das, Yadunandan; Simm, Thomas H.; Clark, Dan; Boswell, John; Gungor, Salih and Moat, Richard
Materials Science and Engineering A, 712 (pp. 681-684)
The influence of temperature on deformation-induced martensitic transformation in 301 stainless steel (2018)
Das, Yadunandan B.; Forsey, Alexander N.; Kelleher, Joe; Kabra, Saurabh; Fitzpatrick, Michael E.; Simm, Thomas H.; Gungor, Salih and Moat, Richard J.
Materials Science and Technology, 34(17) (pp. 2114-2125)
Residual stress measurement round robin on an electron beam welded joint between austenitic stainless steel 316L(N) and ferritic steel P91 (2017-07)
Javadi, Y.; Smith, M.C.; Abburi Venkata, K.; Naveed, N.; Forsey, A.N.; Francis, J.A.; Ainsworth, R.A.; Truman, C.E.; Smith, D.J.; Hosseinzadeh, F.; Gungor, S.; Bouchard, P. J.; Dey, H.C.; Bhaduri, A.K. and Mahadevan, S.
International Journal of Pressure Vessels and Piping, 154 (pp. 41-57)
Measurement of Creep Deformation across Welds in 316H Stainless Steel Using Digital Image Correlation (2017-02-28)
Sakanashi, Y.; Gungor, S.; Forsey, A. N. and Bouchard, P. J.
Experimental Mechanics, 57(2) (pp. 231-244)
In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel (2016-12-15)
Das, Yadunandan B.; Forsey, Alexander N.; Simm, Thomas H.; Perkins, Karen M.; Fitzpatrick, Michael E.; Gungor, Salih and Moat, Richard J.
Materials & Design, 112 (pp. 107-116)
Demosaicing images from colour cameras for digital image correlation (2016-11)
Forsey, A. and Gungor, S.
Optics and lasers in engineering, 86 (pp. 20-28)
The Effect of Hot Deformation Parameters on Microstructure Evolution of the α-Phase in Ti-6Al-4V (2016-08-01)
Perumal, Bama; Rist, Martin A.; Gungor, Salih; Brooks, Jeffery W. and Fitzpatrick, Michael E.
Metallurgical and Materials Transactions A, 47(8) (pp. 4128-4136)
Determination of normal and shear residual stresses from fracture surface mismatch (2015-10-15)
Araujo de Oliveira, J.; Kowal, J.; Gungor, S. and Fitzpatrick, M. E.
Materials & Design, 83(C) (pp. 176-184)
Determination of multiple near-surface residual stress components in laser peened aluminum alloy via the contour method (2015-09)
Toparli, M. Burak; Fitzpatrick, Michael E. and Gungor, Salih
Metallurgical and Materials Transactions A, 46(9) (pp. 4268-4275)
Experimental and numerical study of strength mismatch in cross-weld tensile testing (2015-08)
Acar, Murat O. and Gungor, Salih
Journal of Strain Analysis for Engineering Design, 50(6) (pp. 349-365)
An etching based axisymmetric solution for the determination of residual stresses in long fibre reinforced metal matrix composites (2014)
Durodola, J. F.; Parikh, T. S.; Fellows, N. A. and Gungor, S.
Journal of Composite Materials, 48(19) (pp. 2375-2386)
Improvement of the contour method for measurement of near-surface residual stresses from laser peening (2013-11)
Toparli, M. B.; Fitzpatrick, M. E. and Gungor, S.
Experimental Mechanics, 53(9) (pp. 1705-1718)
Intergranular strains in pre-strained and welded pipes (2010)
Acar, M. O.; Bouchard, P. John; Quinta da Fonseca, Joao; Fitzpatrick, Michael E. and Gungor, Salih
Materials Science Forum, 652 (pp. 13-18)
Rate-dependent deformation of Sn–3.5Ag lead-free solder (2009-11-04)
Sefton, D. E.; Rist, M. A. and Gungor, S.
Journal of Materials Science: Materials in Electronics, 20(11) (pp. 1083-1089)
Determination of the profile of the complete residual stress tensor in a VPPA weld using the multi-axial contour method (2008-10)
Kartal, M. E.; Liljedahl, C. D. M.; Gungor, S.; Edwards, L. and Fitzpatrick, M. E.
Acta Materialia, 56(16) (pp. 4417-4428)
Determination of weld metal mechanical properties utilising novel tensile testing methods (2007)
Kartal, M.; Molak, R.; Turski, M.; Gungor, S.; Fitzpatrick, M. E. and Edwards, L.
Applied Mechanics and Materials, 7-8 (pp. 127-132)
Use of micro tensile test samples in determining the remnant life of pressure vessel steels (2007)
Molak, R. M.; Kartal, M.; Pakiela, Z.; Manaj, W.; Turski, M.; Hiller, S.; Gungor, S.; Edwards, L. and Kurzydłowski, K. J.
Applied Mechanics and Materials, 7-8 (pp. 187-194)
Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method (2006)
Kartal, M.; Turski, M.; Johnson, G.; Fitzpatrick, M.E.; Gungor, S.; Withers, P.J. and Edwards, L.
Materials Science Forum, 524-525 (pp. 671-676)
Residual stress measurements in fibre reinforced titanium alloy composites (2002)
Acta Materialia, 50(8) (pp. 2053-2073)
Measurement of local creep properties in stainless steel welds (2012-09-25)
Sakanashi, Y.; Gungor, S. and Bouchard, J.
In : 4th International Conference on Integrity of High Temperature Welds (25-27 Sep 2012, London)
Numerical study of strength mismatch in cross-weld tensile testing (2011-10)
Acar, M. O.; Gungor, S.; Fitzpatrick, M. E. and Bouchard, P. J.
In : International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST 2011) (24-25 Oct 2011, Antalya, Turkey)
Measurement of Creep Deformation in Stainless Steel Welded Joints (2011)
Sakanashi, Y.; Gungor, S. and Bouchard, P. J.
In : Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics; Volume 5 Optical Measurements, Modeling, and Metrology (11-16 Jun 2011, Uncasville, CT, USA) (pp. 371-378)
Effect of prior cold work on the mechanical properties of weldments (2010-06)
Acar, Murat; Gungor, Salih; Bouchard, Peter and Fitzpatrick, M. E.
In : Proceedings of the 2010 SEM Annual Conference and Exposition on Experimental and Applied Mechanics (7-10 Jun 2010, Indianapolis, Indiana, USA)
Variation of mechanical properties in a multi-pass weld measured using digital image correlation (2009-06-01)
Acar, Murat; Gungor, Salih; Ganguly, Supriyo; Bouchard, Peter and Fitzpatrick, M. E.
In : Society of Experimental Mechanics Annual Conference on Experimental and Applied Mechanics 2009 (1-4 Jun 2009, Albuquerque, New Mexico, USA) (pp. 288-293)