|Materials Engineering Group||Group||Faculty of Mathematics, Computing and Technology|
Fail-Safe Joints between Copper Alloy (C18150) and Nickel-Based Superalloy (GH4169) Made by Transient Liquid Phase (TLP) Bonding and Using Boron-Nickel (BNi-2) Interlayer (2021-10)
Zhang, Chencong and Shirzadi, Amir A.
Metals, 11, Article 1504(10)
Cu2O/CuO heterojunction catalysts through atmospheric pressure plasma induced defect passivation (2021-03-01)
Dey, Avishek; Chandrabose, Gauthaman; Damptey, Lois A.O.; Erakulan, E.S.; Thapa, Ranjit; Zhuk, Siarhei; Dalapati, Goutam Kumar; Ramakrishna, Seeram; Braithwaite, Nicholas St. J.; Shirzadi, Amir and Krishnamurthy, Satheesh
Applied Surface Science, 541, Article 148571
Refill Friction Stir Spot Welding (Refill FSSW) of magnesium lithium alloys: effects of air and argon cooling (2021)
Zhang, Chengcong; Cao, Juyong and Shirzadi, Amir A.
Science and Technology of Welding and Joining, 26(3) (pp. 236-243)
Diffusion bonding of copper alloy to nickel-based superalloy: effect of heat treatment on the microstructure and mechanical properties of the joints (2021)
Zhang, Chengcong and Shirzadi, Amir A.
Science and Technology of Welding and Joining ((Early Access))
Diffusion bonding of TiC or TiB reinforced Ti–6Al–4V matrix composites to conventional Ti–6Al–4V alloy (2020)
Prikhodko, Sergey V.; Savvakin, Dmytro G.; Markovsky, Pavlo E.; Stasuk, Olexander O.; Penney, James; Shirzadi, Amir A.; Davies, Peter D. and Davies, Helen M.
Science and Technology of Welding and Joining, 25(6) (pp. 518-524)
Layered Structures of Ti-6Al-4V Alloy and Metal Matrix Composites on Its Base Joint by Diffusion Bonding and Friction Welding (2019-08)
Prikhodko, SV; Savvakin, DG; Markovsky, PE; Stasiuk, OO; Enzinger, N; Deley, F; Flipo, B; Shirzadi, AA; Davies, HM; Davies, PD; Penny, J; Bozhilov, K and Ivasishin, OM
Microscopy and Microanalysis, 25(S2) (pp. 812-813)
A new method for liquid-phase bonding of copper plates to aluminum nitride (AlN) substrates used in high-power modules (2019-04)
Terasaki, Nobuyuki; Ohashi, Touyou; Nagatomo, Yoshiyuki; Kuromitsu, Yoshirou and Shirzadi, Amir A.
Journal of Materials Science: Materials in Electronics, 30(7) (pp. 6552-6555)
Development of Auto Ejection Melt Spinning (AEMS) and its application in fabrication of cobalt-based ribbons (2019-02)
Shirzadi, A. A.; Kozieł, T.; Cios, G. and Bała, P.
Journal of Materials Processing Technology (pp. 377-381)
Mechanical Properties and Processing Techniques of Bulk Metal–Organic Framework Glasses (2019)
Li, Shichun; Limbach, René; Longley, Louis; Shirzadi, Amir A.; Walmsley, John C.; Johnstone, Duncan N.; Midgley, Paul A.; Wondraczek, Lothar and Bennett, Thomas D.
Journal of the American Chemical Society, 141(2) (pp. 1027-1034)
Modelling and design of new stainless-steel welding alloys suitable for low-deformation repairs and restoration processes (2019)
Shirzadi, Amir A.
Procedia Manufacturing, 37 (pp. 627-632)
Gallium-assisted diffusion bonding of stainless steel to titanium; microstructural evolution and bond strength (2018-12-31)
Shirzadi, Amir A.; Laik, Arijit; Tewari, Raghvendra; Orsborn, Jonathan and Dey, Gautam K.
Materialia, 4 (pp. 115-126)
Residual stress control of multipass welds using low transformation temperature fillers (2018)
Moat, R. J.; Ooi, S.; Shirzadi, A. A.; Dai, H.; Mark, A. F.; Bhadeshia, H. K. D. H. and Withers, P. J.
Materials Science and Technology, 34(5) (pp. 519-528)
Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method (2018)
Zhang, Chengcong and Shirzadi, Amir A.
Science and Technology of Welding and Joining, 23(5) (pp. 394-399)
Effect of Silicon Content on Carbide Precipitation and Low-Temperature Toughness of Pressure Vessel Steels (2017-05)
Ruan, L. H.; Wu, K. M.; Qiu, J. A.; Shirzadi, A. A. and Rodionova, I. G.
Metal Science and Heat Treatment, 59(1-2) (pp. 97-101)
Novel method for refinement of retained austenite in micro/nano-structured bainitic steels (2017)
Hu, F.; Wu, K. M.; Wan, X. L.; Rodionova, I.; Shirzadi, A. A. and Zhang, F. C.
Materials Science and Technology, 33(11) (pp. 1360-1365)
Effect of Cu addition on microstructure and impact toughness in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels (2016-10-20)
Huang, G.; Wan, X. L.; Wu, K. M.; Isayev, O.; Hress, O.; Rodionova, I. and Shirzadi, A. A.
Materials Science and Technology, 33(5) (pp. 602-614)
Effect of Zr-Ti combined deoxidation on the microstructure and mechanical properties of high-strength low-alloy steels (2016-04)
Li, Y.; Wan, X. L.; Lu, W. Y.; Shirzadi, A. A.; Isayev, O.; Hress, O. and Wu, K. M.
Materials Science and Engineering: A, 659 (pp. 179-187)
Microstructure and Interfacial Reactions During Vacuum Brazing of Stainless Steel to Titanium Using Ag-28 pct Cu Alloy (2015)
Laik, A.; Shirzadi, A. A.; Sharma, G.; Tewari, R.; Jayakumar, T. and Dey, G. K.
Metallurgical and Materials Transactions A, 46(2) (pp. 771-782)
In situ observation of bainite to austenite transformation of microalloyed high strength steel during simulated welding cycle (2014-07)
Lei, X. W.; Wang, H. H.; Wu, K. M.; Shirzadi, A. A.; Yin, Y. Q. and Wu, N. C.
Science and Technology of Welding and Joining, 19(5) (pp. 402-407)
Effect of Tempering Temperature on the Microstructure and Hardness of a Super-bainitic Steel Containing Co and Al (2014-06-05)
Hu, Feng; Wu, Kaiming; Hou, Tingping and Shirzadi, Amir Abbas
ISIJ International, 54(4) (pp. 926-931)
Refinement of retained austenite in super-bainitic steel by a deep cryogenic treatment (2014-02-18)
Hu, Feng; Wu, Kaiming; Hodgson, Peter Damian and Shirzadi, Amir Abbas
ISIJ International, 54(1) (pp. 222-226)
Tempering stability of retained austenite in nanostructured dual-phase steels (2013-08)
Hu, Feng; Wu, Kaiming; Hou, Tingping and Shirzadi, Amir A.
Materials Science and Technology, 29(8) (pp. 947-953)
Microstructure and interfacial reactions during active metal brazing of stainless steel to titanium (2013-05)
Laik, A.; Shirzadi, A. A.; Tewari, R. and Kumar, Anish
Metallurgical and Materials Transactions A, 44(5) (pp. 2212-2225)
Crystallization model of magnesium primary phase in the AZ91/SiC composite (2012-12)
Lelito, J.; Zak, P. L.; Greer, A. L.; Suchy, J. S.; Krajewski, W. K.; Gracz, B.; Szucki, M. and Shirzadi, A. A.
Composites Part B: Engineering, 43(8) (pp. 3306-3309)
Effect of SiC reinforcement particles on the grain density in a magnesium-based metal-matrix composite: modelling and experiment (2012-01-31)
Lelito, Janusz; Zak, Pawel L.; Shirzadi, Amir A.; Greer, A. Lindsay; Krajewski, Witold K.; Suchy, Jozef S.; Haberl, Katharina and Schumacher, Peter
Acta Materialia, 60(6-7) (pp. 2950-2958)
Influence of Co and Al on pearlitic transformation in superbainitic steels (2012)
Hu, F.; Wu, K. M. and Shirzadi, A. A.
Ironmaking & Steelmaking, 39(7) (pp. 535-539)
Combined effect of stress and strain on crystallographic orientation of bainite (2011-10)
Shirzadi, A. A.; Abreu, H.; Cayron, C. and Ubhi, S.
Ironmaking & Steelmaking, 38(7) (pp. 519-524)
Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds (2011-04)
Moat, R. J.; Stone, H. J.; Shirzadi, A. A.; Francis, J. A.; Kundu, S.; Mark, A. F.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J.
Science and Technology of Welding & Joining, 16(3) (pp. 279-284)
Accumulation of stress in constrained assemblies: novel Satoh test configuration (2010-05-24)
Shirzadi, A. A. and Bhadeshia, H. K. D. H.
Science and Technology of Welding & Joining, 15(6) (pp. 497-499)
Stainless steel weld metal designed to mitigate residual stresses (2009-03-19)
Shirzadi, A. A.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J.
Science and Technology of Welding & Joining, 14(6) (pp. 559-565)
Bainite orientation in plastically deformed austenite (2009-01)
Shirzadi, A. A.; Abreu, H.; Pocock, L.; Klobčar, D.; Withers, P. J. and Bhadeshia, H. K. D. H.
International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), 100(1) (pp. 40-45)
Joining ceramics to metals using metallic foam (2008)
Shirzadi, A. A.; Zhu, Y. and Bhadeshia, H. K. D. H.
Materials Science and Engineering: A, 496(1-2) (pp. 501-506)
Structural Alloys for Power Plants: Operational Challenges and High-Temperature Materials (2014)
Shirzadi, Amir and Jackson, Sue
Shirzadi, Amir and Jackson, Susan eds.
ISBN : 978-0-85709-238-0 | Publisher : Elsevier Ltd.
Austenite memory and variant selection in a novel martensitic welding alloy (2015-07-01)
Ooi, Steve; Shirzadi, Amir and Yang, Jianguo
In : Joint 3rd UK-China Steel Research Forum (10-11 Jul 2014, Harwell) (S325-S331)
Neural network modelling of hot deformation of austenite (2010-11-15)
Peet, M.J. and Shirzadi, Amir
In : 6th International Conference on Physical and Numerical Simulation of Materials Processing (16-19 Nov 2010, Guilin, China)
Comparison of alloying concepts for Low Transformation Temperature (LTT) welding consumables (2010)
Karlsson, L.; Mráz, L.; Bhadeshia, H. K. D. H and Shirzadi, A. A.
In : Advanced Welding Technologies (19-21 Oct 2010, Sosnowiec, Poland)
Modelling of residual stress minimization through martensitic transformation in stainless steel welds (2010)
Dai, H.; Mark, A. F.; Moat, R.; Shirzadi, A. A.; Bhadeshia, H. K. D. H.; Karlsson, L. and Withers, P. J.
In : 9th International Seminar on ‘Numerical analysis of weldability’ (28-30 Sep 2009, Graz, Austria,)